User Manual

14








TOTALIZER MAINTAINED (LEVEL) RESET AND INHIBIT
The meter performs a reset and inhibits the totalizer displays configured as
, as long as activated (maintained action).








TOTALIZER INHIBIT
The meter inhibits the totalizer displays configured as , as long as
activated (maintained action).

Totalizer B


Totalizer A

FACTORYDESCRIPTIONDISPLAY








TOTALIZER MOMENTARY (EDGE) RESET
When activated (momentary action), the meter resets the displays configured as
. (Momentary resets improve max. input frequencies over maintained resets.)

Totalizer B


Totalizer A

FACTORYDESCRIPTIONDISPLAY

Totalizer B


Totalizer A

FACTORYDESCRIPTIONDISPLAY








STORE TOTALIZER DISPLAY
The meter holds (freeze) the displays configured as , as long as activated
(maintained action). Internally the totalizer values continue to update.








DEACTIVATE SETPOINT MAINTAINED (LEVEL)
The meter deactivates the setpoints configured as , as long as activated
(maintained action). This action only functions with a Setpoint card installed.








DEACTIVATE SETPOINT MOMENTARY (EDGE)
When activated (momentary action), the meter deactivates the setpoints
configured as . This action only functions with a Setpoint card installed.

Totalizer B


Totalizer A

FACTORYDESCRIPTIONDISPLAY
DISPLAY DESCRIPTION FACTORY

Setpoint 1


Setpoint 2


Setpoint 3


Setpoint 4


Setpoint 4


Setpoint 3


Setpoint 2


Setpoint 1

FACTORYDESCRIPTIONDISPLAY








HOLD SETPOINT STATE
The meter holds the state of the setpoints configured as , as long as
activated (maintained action). This action only functions with a Setpoint plug-in
card installed.








ACTIVATE SETPOINT MOMENTARY (EDGE)
When activated (momentary action), the meter activates the setpoints
configured as . This action only functions with a Setpoint card installed.

Setpoint 4


Setpoint 3


Setpoint 2


Setpoint 1

FACTORYDESCRIPTIONDISPLAY
When activated (momentary action), the display intensity changes to the next
intensity level (1 of 4). The four levels correspond to Display Intensity Level
(
) settings of 0, 3, 8 & 15. The intensity level, when changed via the User
Input/ Function Key, is saved at power-down, so the meter will power-up at the
same intensity level.








CHANGE DISPLAY INTENSITY LEVEL








ACTIVATE SETPOINT MAINTAINED (LEVEL)
The meter activates the setpoints configured as , as long as activated
(maintained action). This action only functions with a Setpoint card installed.
DISPLAY DESCRIPTION FACTORY

Setpoint 1


Setpoint 2


Setpoint 3


Setpoint 4


Setpoint 4


Setpoint 3


Setpoint 2


Setpoint 1

FACTORYDESCRIPTIONDISPLAY