Manual

Software User Guide 85
Network Tab
3.4.6 StaticRoutes
TheStaticRoutesmenuallowsyoutoconfigurearoutetoanetworkthroughaninterfacemanually.
• ClickontheStaticRoutesmenuitemandthefollowingdialogwindowwillappear:
ToaddaStaticRouteontheRedLionrouter:
• ClickontheAddbuttonandthedialogwindowbelow
willappear:
Interface:Selecttheinterfacetowhichtherouteshouldbeappliedbyselect‐
ingoneoftheavailableoptionsfromthedrop‐downlist.Theavailableinter‐
facesvariesdependingontheparticularmodelofdevice,aswellasthe
currentconfiguration,andmayincludethosecreatedasaliases,
VPNtunnels.
Useas“Any ”Route?:Selectwhetherornotthisrouteshould beusedasan
“any”routebyselectingYesorNofromtheprovideddrop‐downlist.
WhensettoYes,theroutewilltakeeffectwhenanetworkchangeevent(up/
down)occursonanyinterface.Forexample,
iftheconfiguredinterfaceisset
toeth0,andtheppp0interfacebecomesactive,thentheroutewillbereap‐
pliedtoeth0.