Manual

Table Of Contents

Software User Guide 135

Automation Tab

valueof1000ormore.ThisAnalogInputdeadbandcanbesettoanyvaluebetween0to32767(generateaneventwhenthe

valuechangesby32767).

Object31‐FrozenAnalogInput:Thisfieldisactivatedonbothlevels2and2+.It’susedtodetermineifaDNPpoint

willgenerateevents.IncaseaDNPpointgeneratesevents(Object2BinaryChangeEvents)thenitshouldbeassoci‐

atedtoaclass(Class1,Class2

orClass3),otherwiseitshouldbeassociatedtoNone.BydefaultallDNPPointsdon’t

generateevents,thisfeatureshouldbemodifiedbytheuser.

Object32‐AnalogChangeEvent:Thisfield is activatedonbothlevels2and2+.It ’susedtodetermineifaDNPpoint

willgenerate

events.IncaseaDNPpointgeneratesevents(Object2BinaryChangeEvents)thenitshouldbeassoci‐

atedtoaclass(Class1,Class2orClass3),otherwiseitshouldbeassociatedtoNone.BydefaultallDNPPointsdon’t

generateevents,thisfeatureshouldbemodifiedby

theuser.

Object33‐FrozenChangeEvent:Thisfieldisactivatedonbothlevels2and2+.It’susedtodetermineifaDNPpoint

willgenerateevents.IncaseaDNPpointgeneratesevents(Object2BinaryChangeEvents)thenitshouldbeassoci‐

atedtoaclass(Class1,

Class2orClass3),otherwiseitshouldbeassociatedtoNone.BydefaultallDNPPointsdon’t

generateevents,thisfeatureshouldbemodifiedbytheuser.

• ClickFinishtoenteryourexceptionintothetable.

• Toeditanentry,selectthestationinthetableandclickonthe

editbutton.Todeleteanexistingentry,selectthe

stationinthetableandclickontheDeletebutton.

• ClickonStoreI/OMappingtosaveyourconfigurationbeforemovingtothenextproject.ClickontheObjectMap‐

pingbuttontoreturntotheDNP3ObjectMappin g Configurationdialog

window.

AnalogOutputsMapI/O:

ConfigureDNPPoints:IfNoisselected,thennoAnalogOutputsaremappedasDNPpoints.IfsettoYes,theHighest

HighestRegisterAddress(Required):ThisfieldisusedtoshoworsetthehighestregisteraddresstomapDNPpoints.

• ClickonStoreI/O

Mappingtosaveyourconfi gurationbeforemovingtothenextproject.ClickontheObjectMap‐

pingbuttontoreturntotheDNP3ObjectMappin g Configurationdialogwindow.