Manual

Software User Guide 131
Automation Tab
BinaryInputsMapI/O:ThissectionprovidesconfigurationofMappingBinaryInputI/O’sReg/IndextoDNP
pointsforgeneratingeventsbasedonconfiguredClassAssignmentswhenthestatusofanyBinaryInputI/O’s
changes.
DefaultClassAssignmentsareappliedtoalltheReg/IndexdefinedbyHighestRegisterAddressexceptReg/Indexentries
thataredefinedinExceptionClassAssignmentsTable.
ConfigureDNPPoints:IfoptionisNo,thennoBinaryInputsismappedasDNPpoints.
HighestRegisterAddress(Required):Thisfieldisusedtoshowor
setthehighestregisteraddresstomapDNPpoints.
IfConfigureDNPPointsoptionissettoYes,theHighestRegisterAddressfieldisshowntoenteraHighestRegister
Addressvalue.
DefaultObject2‐BinaryChangeEvent:ThisfieldisactivatedonbothLevels2and2+.It’susedto
determineifaDNP
pointwillgenerateevents.IncaseaDNPpointgenerate sevents(Object2BinaryChangeEvents)thenitshouldbe
associatedtoaclass(Class1,2or3),otherwiseitshouldbeassociatedtoNone.BydefaultallDNPpointsdonotgen‐
erateevents,this
featureshouldbemodifiedbytheuser.
ExceptionClassAssignmentTable:TheExceptiontableprovidesyouwiththeabilitytodefineReg/Indexrangesthat
areneededtobeconfigureddifferentlythanDefaultClassAssignments.
Example:IftheHighestRegisterAddressissetto10andReg/Index2,4,6‐7areneededtobesetfordifferentclassassign‐
mentsthandefault,thenthefinalresultforall10registerswouldbeasfollows:
• Reg/Index0‐1,3,5and8‐10wi llbeset
toDefaultClassAssignments.
• Reg/Index2,4and6‐7willbesettoExceptionClassAssignments.
Note:TheorderoftableentryrangesmustbeenteredfromlowestReg/IndextohighestReg/Index,otherwisetheWebUIwill
alerttheenduserforincorrectrangeentries.ThestartingReg/IndexandEnding
Reg/IndexofExceptiontableentriesforasin‐
gleReg/IndexsuchasReg/Index2and4inaboveexamplehastobethesameaddress.Themaximumsuggestedentriesfor
theexceptiontableare10‐15entries.
• ClicktheAddbuttontodefineanExclusionrange.