Manual

Software User Guide 115
Automation Tab
•CLI:Thecommandlineinterfaceforthecellularmodbusgateway(IndustrialPro)providesaCisco‐styletelnetcom‐
mandlineinterface.ItwritesanXMLconfigurationfile,whichisusedtodrivethebackenddaemons.
•WebUI:ThismethodisaWEBbasedinterfacewhichisthefocusofthisdocumentation.
Theuser
interfaceswillhavetheabilityto:
• Configure/Displaylocalstationinformationsuchasstationnameandstationnumber.
• Configure/Displayserialports
• Configure/Displayremotestations
• Configure/DisplayI/Otransfers
• Configure/DisplayMODBUSforwardstations
• Configure/DisplayMODBUSregistersallocation
3.6.1 LocalStation
• ClickontheLocalStationsubmenuitemandthefollowingmenuwillappear:
StationName(Required):Enterthenameofthelocalstation.Thestationnamemustbelessthanorequalto32char‐
acters.
SationNumber(Required):Enterthelocalstationnumber.Thestationnumbermustbein
arangeof1‐247.
ModbusLocalPort(Required):Enterthelocalportnumber.Theportmustbewithintherangeof1‐65535andthe
recommendeddefaultportissetto502.
• ClickSAVEtostorethesettingsforthenextreboot,orclickAPPLYforthesettingstotak e
effectimmediately.