Manual

Software User Guide 113
Services Tab
TCPClientBroadcaster:Ifthisoptionisselected,thedevicewillsupport10TCPClientbroadcastsocketusingIPDestination
configurationforconnectivity.
TCPClientBroadcasterTrafficActivator:Ifthisoptionisselected,thedevicewillsupport10TCPClientbroadcastsocketusing
IPDestinationconfigurationforconnectivityandwouldconnect
onlyiftheserialdataisavailabletobroadcast.
PeerIPAddress(Required):EnterthepeerIPAddressintothisfield.ThisisrequiredforUDPcommunication.This
specifiesthePeerIPaddressandifsetto0.0.0.0anyremoteIPcansendUDPpacketstoourpeerport,andreturn
packetswillbesentbacktotheIPof
thelasthostthatsentamessage.Packetscannotbesentuntiloneisreceived
first(tolearntheremotepeer’sIP).IfsettoaspecificIP,thenpacketswillbesenttothisIPonly.Therecommended
settingforthisfieldis“0.0.0.0”toallowanyIPto
sendpacketstothepeerimportnumber.
PeerIPPort(Required):EnterthepeerPortnumberintothefield.ThisisrequiredforUDPcommunication.Consult
yournetworkadministratorforUDPapplicatondestinationportnumber.
ClientIPPort(Required):EntertheclientIPportnumberintothisfield.Thisisrequiredif
thepeerIPAddressissetto
aspecificIP,thenpacketswillbesenttospecificIPatthisclientIPportnumberonly.Consultyournetworkadministra‐
torforUDPapplicationdestinationportnumber.Setto0ifthePeerIPissetto“0.0.0.0”.
• ClickSAVEto
storethesettingsforthenextreboot,orclickAPPLYforthesettingstotakeeffectimmediately.
SelectingRevert,willresetallfieldstopreviouslysaveddefaults.