Manual

INITIAL FACTORY CONFIGURATION DUAL COUNTER FACTORY SETTINGS*
-6-
Keys struck Display Description
4,1 41 2 Personality selected as DUAL COUNTER
4,2 42 3 Reset Counters A & B
4,3 43 1 Count with Inhibit
4,4 44 1 Single edge counting (A & B)
4,5 45 1 Counter B Scale multiplier of 1.0
4,6 46 1 Counter B leading zero blanking and no decimal point
5,1 51 2 Outputs 1 & 2 assigned to Counter B
5,2 52 3 Output 1 terminates at Reset, Normal Phase.
5,3 0000.10 Timed Output 1 Value of 0.1 Sec
5,4 54 3 Output 2 terminates at Reset, Normal Phase.
5,5 0000.10 Timed Output 2 Value of 0.1 Sec
5,6 56 1 Counter B, manual reset to zero
6,1 61 1 Counter A, manual reset to zero
6,4 64 1 Counter A scale multiplier of 1
6,5 65 1 Counter A leading zero blanking, no decimal point
6,6 66 1 No functions except Reset enabled
3 01.0000 Scale Factor A set to 1.0000
3 01.0000 Scale Factor B set to 1.0000
1 000500 Preset 1 set to 500
2 001000 Preset 2 set to 1000
* If [41 1] is changed to [41 2], then the factory settings are as shown.
Keys struck Display Description
4,1 41 1 Personality selected as COUNTER/RATE
4,2 42 3 Reset Rate (A) Output(s) & Counter (B)
4,3 43 1 Count with Inhibit
4,4 44 1 Single edge counting (B)
4,5 45 1 Counter B Scale multiplier of 1.0
4,6 46 1 Counter B leading zero blanking and no decimal point
5,1 51 2 Outputs 1 & 2 assigned to Counter (B)
5,2 52 3 Output 1 terminates at Reset, Normal Phase
5,3 0000.10 Timed Output 1 Value of 0.1 Sec
5,4 54 3 Output 2 terminates at Reset, Normal Phase
5,5 0000.10 Timed Output 2 Value of 0.1 Sec
5,6 56 1 Counter (B), manual reset to zero
6,1 61 4 No Rate (A) right hand dummy zeros
6,2 62 1 Rate per Second
6,3 63 1 Rate (A) 0.5 Sec Minimum Update Time
6,4 64 4 Rate (A) Scale multiplier of 1
6,5 65 1 Rate (A) leading zero blanking, no decimal point
6,6 66 1 No functions except Reset enabled
3 01.0000 Scale Factor A (Rate) set to 1.0000
3 01.0000 Scale Factor B (Counter) set to 1.0000
1 000500 Preset 1 set to 500
2 001000 Preset 2 set to 1000