User guide

FACTORY SETTINGS
INITIAL FACTORY CONFIGURATION
Keys Struck Display Description
4,3 43 1 Count with Inhibit
4,4 44 1 Count on falling edge of Input A
4,5 45 1 Scale Multiplier of 1.0
4,6 46 1 Leading zero blanking and no decimal point
5,2 52 5 Output 1 terminates after Timed Output, Normal Phase
5,3 0000.10 Timed Output 1 Value of 0.1 sec
5,4 54 5 Output 2 terminates after Timed Output, Normal Phase
5,5 0000.10 Timed Output 2 Value of 0.1 sec
6,1 61 4 Reset Process, Batch, and Total Counter
6,2 62 1 Process Counter, Manual Reset to Zero
6,3 63 1 Batch Counter, Manual Reset to Zero
6,4 64 3 Output B terminates at reset. Normal output phase
6,5 0000.10 Timed Output B Value of 0.1 sec
6,6 66 6 Presets, Scale Factor 2-Button Reset, & Counter
Load Programming Enabled
3 01.0000 Scale Factor set to 1.0000
1 000100 Preset 1 set to 100 (when Process Count displayed)
2 000200 Preset 2 set to 200 (when Process Count displayed)
1 000010 Preset B set to 10 (when Batch Count is displayed)
E & +/- 000000 Counter Load Values set to 0 (displays value for
displayed counter)
Note: Entering a -1 in function code 41 will restore the unit to the factory configuration
shown above.
-6-