Owner's manual

FACTORY SETTINGS
Keys Struck Display Description
4,1 41 1
Personality selected as Counter
4,3 43 1
Count with Inhibit
4,4 44 1
Count on one edge of input (no doubling)
4,5 45 1
Scale Multiplier of 1.0
4,6 46 1
Leading zero blanking and no decimal point
5,1 51 1
Manual reset-to-zero, as long as button remains PUSHED
5,2 52 3
Output 1 terminates at Reset, Normal Output Phase
5,3 0000.10
0.10 second Output 1 time delay. Note that this function
will display the actual amount of time delay, and not a
mode command. In this case, it displays a 0.10 indicating
0.10 seconds.
*5,4 54 3
Output 2 terminates at Reset, Normal Output Phase.
*5,5 0000.10
0.10 second Output 2 time delay. Note that this function
will display the actual amount of time delay, and not a
mode command. In this case, it displays a 0.10 indicating
0.10 seconds.
6,1 61 4
No right-hand dummy zeros
6,6 66 4
Reset enabled along with scale factor and presets.
3 01.0000
Scale Factor set to unity
1 000500
Preset 1 value equals 500
*2 001000
Preset 2 value equals 1000
When the unit is shipped from the factory, the functions and modes are
programmed as shown above.
*Applies to the Gemini 2000 only.
–5–