Technical data

30.5030111
FOR MORE INFORMATION ON OUR PRODUCTS OR SYSTEMS, CALL 1-800-BUY-BOLT
30
Adhesives and Sealants
E-Z Poxy
™
Aluminum
(Strong, fast setting, fast curing, multi-purpose epoxy putty stick)
A hand-kneadable, non-rusting, aluminum reinforced
epoxy putty that mixes in just one minute to provide fast
repairs to all types of aluminum. It comes in a handy
four-ounce "tootsie roll" form with the curing agent
encapsulated in the contrasting color base material. The
putty-like consistency eliminates drips and runs, providing
"no mess" applications with no tools required for use.
Simply cut off amount needed, knead and apply.
Features:
• No measuring, mess or waste
• Fast – cures in 60 minutes
• Non-rusting – can even be applied underwater
Applications:
• Perfect for repairing storm doors, windows, aluminum boats, recreational vehicles, aluminum
siding, aluminum tanks, castings, pipes and engine blocks.
Part #74505 – 4 oz.
E-Z Poxy
™
Aqua Repair
(Repairs wet areas and underwater surfaces)
A hand-kneadable, specialty epoxy putty that mixes in just one minute for repairs to damp, wet
areas and underwater surfaces. It contains a fading dye and becomes "fi berglass white" after
mixing. It may be applied underwater, in either fresh or salt water and will bond tenaciously to
substances such as fi berglass, metal, wood, concrete, ceramic, glass, etc.
Features:
• No measuring, mess or waste
• Excellent as an adhesive
• Can be applied underwater
• Does not yellow when exposed to UV light
• Authorized by the USDA for use in federally
inspected meat and poultry plants
Applications:
• Perfect for patching dings, scratches, cuts, gouges
and holes in fi berglass, metal and wood.
• Repairs fi ttings, pipes, electrical connections,
leaking gaskets, fuel tanks, etc.
Part #74500 – 4 oz.
PHYSICAL PROPERTIES:
Working Life (min.) .................................................. 20
Shelf Stability ......................... 6 months (min. @ 75
o
F)
Shore D Hardness (full cure, 24 hrs.) ...................... 75
Lap Shear Tensile Strength on Steel
(1" x 1" x 1/16") ............................................ 700 Lbs.
Temperature .................................... 250
o
F continuous
Limitations .......................................300
o
F intermittent
Chemical Resistance: Resistant to hydrocarbons,
ketones, alcohols, esters, halocarbons, aqueous salt
solutions and dilute acids and bases.
Electrical Resistance ....................... 30,000 megohms
Dielectric Strength ................................... 300 volts/mil
Shrinkage .............................................. Less than 1%
Non-Volatile Content...........................................100%
Compression Strength .................................12,000 psi
PHYSICAL PROPERTIES:
Work Life (Minimum) ......................................5-7
Shelf Stability ...............24 months (min. @ 75
o
F)
Shore D Hardness (full cure 24 hrs.) ..........75-85
Lap Shear Tensile Strength ...... 500-700 on steel
(1" x 1" x 1/16") .............. 400-600 on aluminum
Compression Strength lbs./in.
2
................ 12,000
Shrinkage .....................................................<1%
Non-Volatile Content...................................100%
Electrical Resistance ............... 30,000 megohms
Dielectric Strength ........................... 300 volts/mil
Temperature ............................ 250
o
F continuous
.................................................300
o
F intermittent
Chemical Resistance: Resistant to hydrocarbons,
ketones, alcohols, esters, halocarbons, aqueous
salt solutions and dilute acids and bases.
E-Z Poxy
™
200
(For steel hard repairs in a stick)
A combination of steel reinforced epoxy resin and hardener in a stick. Simply knead putty and apply to
damaged area. It can be drilled, fi led, tapped, sanded or machined after one hour.
Features:
• No measuring, mess or waste
• Fast – sets in 10 minutes
• Adheres to damp surfaces and hardens under water
• Certifi ed to NSF/ANSI Standard 61 for use in contact
with potable water and drinking water systems
• Authorized by the USDA for use in federally
inspected meat and poultry plants
Applications:
• Perfect for repairing tanks, radiators, bathroom fi xtures,
tile, cars, boats, metal and wood furniture, downspouts,
gutters, garbage cans, valves, cast iron,etc.
Part #74502 – 4 oz.
PHYSICAL PROPERTIES:
Density.................... 18.5 lb./gal. (2.2 gm/cm
3
)
Compression Strength ....................12,000 psi
Tensile Strength ................................6,000 psi
Modulus of Elasticity .......................6 x 10
5
psi
Adhesive Strength ...............................900 psi
Izod Impact .................. 0.3 ft.-lb./in. (notched)
Hardness (Shore D).................................... 80
Maximum Use Temp .................300
o
F (149
o
C)
ELECTRICAL PROPERTIES:
Volume Resistance ............... 1 x 10
12
ohm-cm
Dielectric Strength ....300 volts/mil @ 0.15 cm
IMPORTANT: Do not use on polyethylene,
polypropylene and polybutylene.
070113