Technical data
30.68 050114
FOR MORE INFORMATION ON OUR PRODUCTS OR SYSTEMS, CALL 1-800-BUY-BOLT
30
Moly Dry Lube
(High temperature, high pressure, dry fi lm lube)
A thin, quick drying fi lm gives long lasting protection to all moving and sliding parts. Reduces
friction at all contact points preventing galling, seizing and metal-to-metal wear. Protects
surfaces from moisture, rust, corrosion and also resists attack by oil, grease, water, most
chemicals and acids.
Features:
• Lubricate and protects
• High pressure lube 200,000 psi
• Wide temperature range -100
o
F to +700
o
F
• Waterproof and dustproof
• Super slick
• Non-corrosive
Part #74123 – 14 oz.
Penetrating Oil with Graphite
(Frees rusted parts)
Penetrates deeply to free countersunk threads and prevent breakage of frozen parts. Cuts rust,
red or white lead, tar, dirt, grease, deposits of carbon, graphite, etc. Will not harm basic metals,
rubber or paint.
Features:
• Frees rusted nuts and bolts in seconds
• Prevents oxidation
• Resists salt water corrosion
• No water wash-out
• All position valve
Part #74101 – 14.75 oz.
Pneumatic Tool Anti-Seize Lubricant
(Superior lubricant for oilers in pneumatic lines)
Formulated to meet the special requirements of industrial, household and agricultural tools.
It absorbs water and eliminates ice buildup and frost in air tools. A blend of rust and corrosion
inhibitors and a special base fl uid oil minimizes tool wear and allows operation of air tools at
temperatures as low as -40
o
F. Works on all types of pneumatic equipment and gives worn
tools new life.
Features:
• Wide temperature range -40
o
F to 350
o
F
• Prevents rust and corrosion
• Less friction, wear, heat and noise
• Protects against corrosion
• Absorbs moisture, eliminates ice buildup and frost in air tools
Applications:
Ideal for use on:
• Air Impact Tools • Drills • Grinders • Screwdrivers • Sanders • Percussion Tools
• Household Shop Tools • Air Line Lubricators • All Air Tools Using Oil Lubrication
Part #974375
32 fl . oz.
Applications:
• Used for freezing frozen metal parts,
lubricating air driven tools, dismantling
equipment and removing broken taps
and dies.
Applications:
• Used to protect all moving and sliding parts
• Use when lubrication is essential in
tight fi tting, high temperature and high
pressure applications
Lubricants