Technical data

30.66 050114
FOR MORE INFORMATION ON OUR PRODUCTS OR SYSTEMS, CALL 1-800-BUY-BOLT
30
Lithium Grease White – Cartridge
(Premium grade industrial grease)
Specially designed to meet the ever-increasing requirements for high fi lm strength, higher operating
temperatures, greater stability and longer lubricant life. The tough protective fi lm ensures superior
lubrication and extended lubrication intervals. This shear stable, noncorrosive, extreme pressure,
water resistant lubricant is used for both plain and anti-friction bearings, gears, cams and slides.
It is also highly recommended as a bearing lubricant for electrical motors, spindles and other
mechanical devices when low torque, moderate speeds and long life are essential.
Features:
• Anti-Corrosive • Non-Staining • Water Resistant
• Superior Performance at Temperatures of 0
o
F to 325
o
F
• Extreme Pressure 65 Lb. Timken Load • EP Additives
Applications:
Ideal for use on:
• Wheel Bearings • Chassis Points • Ball Joints
• Slides • Rollers • Hinges • Small Gears
• Overhead Tracks • Construction Equipment • Mining
• Logging • Marine Applications • Industrial Applications
Part #74428 – 14 oz.
SPECIFICATIONS:
Drop Point (ASTM D-2265) ... 390
o
F (199
o
C)
Specifi c Gravity......................................0.95
Density (lb./gal.).......................................8.1
Temp. Range .0
o
F to 325
o
F (-18
o
C to 163
o
C)
Timken EP Test
(ASTM D-2509) .................65 lbs., Typical
Base Oil Viscosity .............. ISO 220, Typical
NLGI Rating ................................................2
Meets or exceeds requirements of U.S. Mili-
tary Specifi cation MIL-G-18458B (SH).
Lubricants
High-Temp Grease – Cartridge
(High temperature, high purity, synthetic lubricant)
A superior quality, high-performance synthetic grease specially formulated for extremely high
temperature applications. Assures minimal friction and maximum corrosion protection. Ideal for
all high temperature applications requiring superior lubricity and long service life. USDA accepted
for use in federally inspected meat and poultry plants. USDA accepted Classifi cation H1.
Features:
• High-purity synthetic grease
• Extremely effective in high temperatures
• Resists water, acids, alkalis and salts
• USDA accepted
• Waterproof
Applications:
• Ideal for all high temperature
applications requiring superior
lubricity and long service life
Part #74422 – 14.5 oz.
SPECIFICATIONS:
Temp. Range ......-65
o
F to 500
o
F (-54
o
C to 260
o
C) Continuous
.............................-65
o
F to 550
o
F (-54
o
C to 288
o
C) Intermittent
NLGI Grade (ASTM D1092) ...................................................2
Timken OK Load (ASTM 2509) ..................................... 40 lbs.
Dropping Point (ASTM D566) .................................... Non-melt
Shelf Life...................................................................>10 years
Color ............................................................ Translucent White
Odor................................................................................. None
Penetration, Unworked (ASTM D217) .....................280mm/10
Four Ball EP Test (ASTM D2596)
Load Wear Index ....................................................42.53 kg
Weld Point .................................................................200 kg
Four Ball Wear Test (ASTM D2266) Scar Dia. ............0.50mm
Salt Spray Test (ASTM B117) ...........................................Pass
Dielectric Loss (ASTM D924) ....................................1.2 x 10
12
Dielectric Resistivity (ASTM D1169) ..........................1.7 x 10
14
Dielectric Constant (ASTM D924) .......................................2.5
Oil Separation (ASTM D1402) ......................................... None
Evaporation Loss (ASTM D972) 22 hrs @ 212
o
F (100
o
C) <1%
Oxidation, Stability 100 hours (ASTM D942) ....................Pass