Technical data

ManualsBrandsred lion ManualsPower ToolsEngine-Driven Aluminum TRANSFER Pump

30.34 050114

FOR MORE INFORMATION ON OUR PRODUCTS OR SYSTEMS, CALL 1-800-BUY-BOLT

*NOTE: Always test product on an inconspicuous area before using. Since conditions of use are outside our control, we can assume no liability for results obtained

or damages incurred through the application of this product.

X-tra Clean NB

(Concentrated, all purpose water soluble cleaner/degreaser)

This highly concentrated non-butyl formulation of high grade synthetic surfactants yields the

ultimate in cleaning performance. It is free rinsing and works equally well in hot, cold, hard or

soft waters. It penetrates, loosens and emulsiﬁ es all types of oil, grease and soil – leaving an

exceptionally clean surface. Safe on most every water washable surface.

Features:

• Highly concentrated • Heavy duty • Water soluble • Non-ﬂ ammable • Biodegradable

Applications:

• Basins • Bilges • Concrete • Dies • Equipment • Fans • Floors • Hoods • Machinery

• Metal • Plastic • Porcelain • Rubber • Sinks • Steel • Sumps • Terrazzo • Toilets

• Tooling • Vinyl Upholstery • Vitreous Ware • Walls • Wood

PARTS

WATER

Degreasing ............................................................10

Heavy General Cleaning .......................................20

Light General Cleaning ..........................................60

Deodorizing ...........................................................60

Wax and Finish ......................................................10

Adjust dilutions according to type and amount of soil.

Steam Cleaning: Dilute (4-14) oz. cleaner

with (1) gallon of water. Adjust solution

according to desired results.

Instructions*:

Apply manually or with sprayer. Allow to work

for a few minutes, then wipe, mop or rinse

off. See dilution chart.

Dilution Rates (1-Part X-tra Clean NB)

Synthetic / Soluble Cutting Fluid

(Concentrated water soluble lubricant)

A concentrated synthetic coolant for metal working applications. Can be used "as is" or diluted

with up to 40 parts water.

Features:

• Clear concentrated water soluble lubricant

• Prevents corrosion

• Use for machining, cutting and grinding of ferrous and non-ferrous metals

Applications:

Effective and suitable for use in working:

• Carbon Steel • Stainless Steel • Vanadium • Chrome

• Molybdenum • Nitralloy • Titanium • Bronze • Copper

• Boron Carbide and many other specialty alloys

Instructions*:

May be used with or without dilution depending upon the job requirements. Dilutes clear in all

proportions for complete job visibility. It is suggested that more difﬁ cult job trials be made with ﬂ uid full

strength. If the results are satisfactory, further dilution up to 40 parts water to 1 part product can be

tested to determine the most economical dilution.

Part #74320:

55 Gallon Drum

Part #74321:

30 Gallon Drum

Part #74323:

5 Gallon Pail

Part #74324:

1 Gallon Container

(Buy 4 x 1 Gal)

Part #74335:

55 Gallon Drum

Part #74336:

30 Gallon Drum

Part #74338:

5 Gallon Pail

Part #74339:

1 Gallon Container

(Buy 4 x 1 Gal)

Bulk Chemicals