Technical data

30.13030111
FOR MORE INFORMATION ON OUR PRODUCTS OR SYSTEMS, CALL 1-800-BUY-BOLT
30
Super Adhesive Sealant
(Multi-purpose, fl exible, high strength adhesive)
A versatile, high-performance industrial adhesive and sealant which provides exceptional
mechanical and chemical bonding in plant, fl eet, commercial and contractor applications. Adheres
to and seals all woods, metals, concrete, masonry, ceramics, rubber, fi berglass, glass and plastics.
Features:
• Superior strength
• Extremely fl exible
• Abrasion resistant
• Paintable
• Waterproof
• Self-leveling
Part #74510 – 3.7 fl . oz.
Applications:
• Plant and Building Maintenance
• Transportation
• Marine
• Electrical
• Rubber Goods and Plastics
• Tools and Fasteners
• Construction and Carpentry
TECHNICAL DATA:
Temperature Range ....... -40
o
F to 150
o
F
Tensile
Strength ...... 3500 lb/in.
2
(ASTM D-412)
Elongation............900% (ASTM D-412)
Dielectric Strength ............ 400 volts/mil
Dry Time ...................... Tack: 5 minutes
Paintable: 24 hours
Super Adhesive Sealant UV
(Multi-purpose, ultra-violet light resistant high strength adhesive )
This multi-purpose, clear adhesive is formulated for use in applications that may be exposed
to ultra-violet light. Adheres to wood, metal, rubber, glass and most plastics. It is not for use on
Styrofoam
TM
. Its fl exible bond resists cold temperatures, yellowing, cracking and embrittlement. Can
be submerged in fresh and salt water after complete cure. Great for bonding objects subject to wear
and to vibration. Safe for applications exposed to dilute acids and dilute caustics. Recommended for
all industrial applications where UV resistance is required.
Part #74554 – 10.2 fl . oz.
TECHNICAL DATA:
Full Cure Time ........................Thin fi lm 24 hours,
................................................Thick fi lm 48-72 hours
Tensile Strength ......................3500 lb./in.
Elongation...............................900% (ASTM D-412)
Service Temperature Range ...-40
o
F to 150
o
F
Paint-Over Time......................24 hours
Dielectric Strength ..................400 V/mil
Adhesives and Sealants
010114
Liquid Electrical Tape
(Brush applicator cap)
Forms a protective dielectric coating on electrical connections to seal out moisture and prevent
corrosion. Wil not peel or unravel. Flame retardant. Service temperature range is -30
o
F to +255
o
F.
Completely waterproofs connections and can be applied to irregular shaped or
hard-to-reach conditions.
Features:
• Seals and protects electrical connections
• Adheres to all metal, plastic, vinyl, rubber
and composite surfaces
• Stops terminal screws from loosening from vibration
• Safe and easy to use
• Fast drying
• Dielectric strength 1000-1500 volts/mil
Applications:
• Bilge pumps, outdoor exposed wiring, sprinkler pumps, timers, underground wiring, outdoor
lighting fi xtures, instruments, computers... anywhere a weatherproof and dependable
connection is needed.
Part #74547 – 4 fl . oz.
Features:
• UV resistant formula
• Industrial strength
• Extremely fl exible
• Waterproof
• Paintable
• Self-leveling
Applications:
• Plant and Building
Maintenance
• Transportation
• Marine
• Electrical
• Rubber Goods & Plastics
• Tools and Fasteners
• Construction & Carpentry