Material Safety Data Sheet

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
828902 - Red Line® SuperCool Performance Coolant With WaterWetter®
Page 3/6
Issue Date: 20-May-2015 Status: FINAL
Engineering controls: General ventilation should be adequate for normal conditions of intended use. Additional engineering
controls may be necessary if working with the product in enclosed areas and/or at elevated temperatures.
Eye/Face Protection: The use of eye/face protection is not normally required; however, good industrial hygiene practice suggests
the use of eye protection that meets or exceeds ANSI Z.87.1 whenever working with chemicals.
Skin/Hand Protection: The use of skin protection is not normally required; however, good industrial hygiene practice suggests the
use of gloves or other appropriate skin protection whenever working with chemicals.
Respiratory Protection: Respiratory protection is not normally required under intended conditions of use. Emergencies or
conditions that could result in significant airborne exposures may require the use of NIOSH approved respiratory protection. An
industrial hygienist or other appropriate health and safety professional should be consulted for specific guidance under these
situations.
Suggestions provided in this section for exposure control and specific types of protective equipment are based on readily
available information. Users should consult with the specific manufacturer to confirm the performance of their protective
equipment. Specific situations may require consultation with industrial hygiene, safety, or engineering professionals.
SECTION 9: Physical and chemical properties
Note: Unless otherwise stated, values are determined at 20°C (68°F) and 760 mm Hg (1 atm). Data represent typical values and are not intended
to be specifications.
SECTION 10: Stability and reactivity
Reactivity: Not chemically reactive.
Chemical stability: Stable under normal ambient and anticipated conditions of use.
Possibility of hazardous reactions: Hazardous reactions not anticipated.
Conditions to avoid: None known
Incompatible materials: None known
Hazardous decomposition products: Not anticipated under normal conditions of use.
SECTION 11: Toxicological information
Information on Toxicological Effects
Substance / Mixture
Aspiration Hazard: Not an aspiration hazard.
Appearance: pink, Clear and bright Flash Point: Not applicable
Physical Form: Liquid Test Method: Not applicable
Odor: Pungent Initial Boiling Point/Range: 212 °F / 100 °C
Odor Threshold: No data Vapor Pressure: No data
pH: Not applicable Partition Coefficient (n-octanol/water) (Kow): No data
Vapor Density (air=1): No data Melting/Freezing Point: 32 °F / 0 °C
Upper Explosive Limits (vol % in air): No data Auto-ignition Temperature: No data
Lower Explosive Limits (vol % in air): No data Decomposition Temperature: No data
Evaporation Rate (nBuAc=1): No data Specific Gravity (water=1): No data
Particle Size: Not applicable Bulk Density: No data
Percent Volatile: No data Viscosity: 0.78 cSt @ 40°C
Flammability (solid, gas): Not applicable Solubility in Water: Soluble
Acute Toxicity Hazard Additional Information LC50/LD50 Data
Inhalation
Unlikely to be harmful >5 mg/L (mist, estimated)
Dermal
Unlikely to be harmful > 2 g/kg (estimated)
Oral
Unlikely to be harmful > 5 g/kg (estimated)