Material Safety Data Sheet

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
830004 - Red Line® Full Synthetic 20W50 Motorcycle Oil
Page 2/7
Issue Date: 12-Sep-2017 Status: FINAL
attention.
Skin Contact: Immediately flush affected area(s) with large amounts of water while removing contaminated shoes, clothing, and
constrictive jewelry. If skin surface is damaged, apply a clean dressing and seek immediate medical attention. If skin surface is not
damaged, cleanse the affected area(s) thoroughly by washing with mild soap and water or a waterless hand cleaner. If irritation or
redness develops, seek immediate medical attention. Wash contaminated clothing before reuse. Remove contaminated shoes and
clothing and cleanse affected area(s) thoroughly by washing with mild soap and water or a waterless hand cleaner. If irritation or
redness develops and persists, seek medical attention.
Inhalation: First aid is not normally required. If breathing difficulties develop, move victim away from source of exposure and into
fresh air in a position comfortable for breathing. Seek immediate medical attention.
Ingestion: First aid is not normally required; however, if swallowed and symptoms develop, seek medical attention.
Most important symptoms and effects, both acute and delayed: Inhalation of oil mists or vapors generated at elevated
temperatures may cause respiratory irritation. Accidental ingestion can result in minor irritation of the digestive tract, nausea and
diarrhea. Prolonged or repeated contact may dry skin and cause irritation
Notes to Physician: Acute aspirations of large amounts of oil-laden material may produce a serious aspiration pneumonia.
Patients who aspirate these oils should be followed for the development of long-term sequelae. Inhalation exposure to oil mists
below current workplace exposure limits is unlikely to cause pulmonary abnormalities.
SECTION 5: Firefighting measures
NFPA 704 Hazard Class
Extinguishing Media: Dry chemical, carbon dioxide, foam, or water spray is recommended. Water or foam may cause frothing of
materials heated above 212°F / 100°C. Carbon dioxide can displace oxygen. Use caution when applying carbon dioxide in
confined spaces. Simultaneous use of foam and water on the same surface is to be avoided as water destroys the foam.
Specific hazards arising from the chemical
Unusual Fire & Explosion Hazards: This material may burn, but will not ignite readily. If container is not properly cooled, it
can rupture in the heat of a fire.
Hazardous Combustion Products: Combustion may yield smoke, carbon monoxide, and other products of incomplete
combustion. Oxides of sulfur, nitrogen or phosphorus may also be formed.
Special protective actions for fire-fighters: For fires beyond the initial stage, emergency responders in the immediate hazard
area should wear protective clothing. When the potential chemical hazard is unknown, in enclosed or confined spaces, a self
contained breathing apparatus should be worn. In addition, wear other appropriate protective equipment as conditions warrant
(see Section 8). Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Stop spill/release if it can be
done safely. Move undamaged containers from immediate hazard area if it can be done safely. Water spray may be useful in
minimizing or dispersing vapors and to protect personnel. Cool equipment exposed to fire with water, if it can be done safely. Avoid
spreading burning liquid with water used for cooling purposes.
See Section 9 for Flammable Properties including Flash Point and Flammable (Explosive) Limits
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures: This material may burn, but will not ignite readily.
Keep all sources of ignition away from spill/release. Stay upwind and away from spill/release. Avoid direct contact with material. For
large spillages, notify persons down wind of the spill/release, isolate immediate hazard area and keep unauthorized personnel out.
Wear appropriate protective equipment, including respiratory protection, as conditions warrant (see Section 8). See Sections 2 and
7 for additional information on hazards and precautionary measures.
Environmental Precautions: Stop and contain spill/release if it can be done safely. Prevent spilled material from entering sewers,
Health: 2 Flammability: 1 Instability: 0
0 (Minimal)
1 (Slight)
2 (Moderate)
3 (Serious)
4 (Severe)