Manualshelf

Installation Guide

ManualsBrandsRed Head ManualsAnchors1/2 in. x 5-1/2 in. Galvanized Steel Hex-Nut-Head Concrete Wedge Anchors (10-Pack)
1
The use of a Tapcon/Red Head carbide drill
bit or drill bit conforming to ANSI Standard
B212.15 is recommended. Se recomienda usar
una broca para taladro o una broca para taladro
Tapcon/Red Head de carburo conforme a la Norma
B212.15 de ANSI.
Limpie
Clean
1/4 in.
Martille
Drive
3-5 X
Apriete
Tighten
Taladre
Drill
DRILL
1/4"
DEEPER
THAN
ANCHOR
EMBED-
MENT
PERFORE
UN
AGUJERO
1/4"
MÁS
PROFUNDO
QUE EL
EMPOTRA-
MIENTO
DEL ANCLA

Summary of content (1 pages)