Specification

86
Call our toll free number 800-848-5611 or visit our web site for the most
current product and technical information at www.itwredhead.com
Typical Applications—Cladding and Brick Ties
Environment—Slight to moderate degree of pollution
Level of Corrosion—Medium
Typical Applications—Shelf ledgers, electrical boxes, conduit
Environment—Interior (non-corrosive)
Level of Corrosion—Low
HEAD STYLE PART NO.
ANCHOR DIA.
& DRILL BIT
SIZE
EFFECTIVE ANCHOR LENGTH*
BOLT DIA. /
THREADS PER
INCH
MIN. EMBEDMENT
MAX. THICKNESS OF
MATERIAL TO BE FASTENED
QTY/WT PER
BOX
qty / lbs.
QTY/WT PER
MASTER CTN
qty / lbs.in. (mm) in. (mm) in. (mm)
Hex Nut
HN-1614 5/16" 1-1/2 (38.1) 1/4" / 20 1-1/4 (31.8) 1/4 (6.4) 100 / 4.0 1000 / 41
HN-3817 3/8" 1-7/8 (47.6) 5/16" / 18 1-1/2 (38.1) 3/8 (9.5) 50 / 3.5 500 / 36
HN-3830 3 (76.2) 5/16" / 18 1-1/2 (38.1) 1-1/2 (38.1) 50 / 4.9 400 / 40
HN-1222 1/2" 2-1/4 (57.2) 3/8" / 16 1-7/8 (47.6) 3/8 (9.5) 25 / 3.3 250 / 34
HN-1230 3 (76.2) 3/8" / 16 1-7/8 (47.6) 1-1/8 (28.6) 25 / 4.0 200 / 33
HN-1240 4 (101.6) 3/8" / 16 1-7/8 (47.6) 2-1/8 (54.0) 25 / 5.3 200 / 44
HN-5830 5/8" 3 (76.2) 1/2" / 13 2 (50.8) 1 (25.4) 25 / 7.0 150/ / 46
HN-5842 4-1/4 (108.0) 1/2" / 13 2 (50.8) 2-1/4 (57.2) 10 / 3.9 100/ / 41
HN-3440 3/4" 4 (101.6) 5/8" / 11 2-1/4 (57.2) 1-3/4 (44.5) 5 / 3.2 50/ / 33
Phillips
Flat Head
FS-3840 3/8"
(head dia. .722)
4 (101.6) 5/16" / 18 1-1/2 (38.1) 2-1/2 (63.5) 50 / 5.3 400 / 44
FS-3850 5 (127.0) 5/16" / 18 1-1/2 (38.1) 3-1/2 (88.9) 50 / 5.6 300 / 40
FS-3860 6 (152.4) 5/16" / 18 1-1/2 (38.1) 4-1/2 (114.3) 50 / 8.0 300 / 48
* Phillips flat head uses a standard 80°– 82° counter sink.
HEAD STYLE PART NO.
ANCHOR DIA.
& DRILL BIT
SIZE
EFFECTIVE ANCHOR LENGTH
BOLT DIA. /
THREADS PER
INCH
MIN. EMBEDMENT
MAX. THICKNESS OF
MATERIAL TO BE FASTENED
QTY/WT PER
BOX
qty / lbs.
QTY/WT PER
MASTER CTN
qty / lbs.in. (mm) in. (mm) in. (mm)
Hex Nut
SHN-3817 3/8" 1-7/8 (47.6) 5/16" / 18 1-1/2 (38.1) 3/8 (9.5) 50 / 3.5 500 / 36
SHN-1222 1/2" 2-1/4 (57.2) 3/8" / 16 1-7/8 (47.6) 3/8 (9.5) 25 / 3.3 250 / 34
SHN-1240 4 (101.6) 3/8" / 16 1-7/8 (47.6) 2-1/8 (54.0) 25 / 5.3 200 / 44
Phillips
Flat Head
SFS-3826 3/8" 2-7/8 (73.0) 5/16" / 18 1-1/2 (38.1) 1-3/8 (34.9) 50 / 3.8 500 / 40
SFS-3840 4 (101.6) 5/16" / 18 1-1/2 (38.1) 2-1/2 (63.5) 50 / 5.3 400 / 44
* Flat head uses a standard 80°– 82° counter sink.
For continuous extreme low temperature applications, use stainless steel.
A
A
(FS)
*Eective Anchor Length
(HN)
SELECTION CHART
Dynabolt
Carbon Steel w/Zinc Plating
SELECTION CHART
Dynabolt
304 Stainless Steel