Installation guide

Sun Java System Web Proxy Server  217
Chapter 5: Initial Setup
See the documentation for your firewall product if you need information
about how to accomplish these firewall configuration tasks.
Blocking remote users’ internet access when Remote
Filtering is unavailable
If you are using the optional Websense Remote Filtering feature, you can
configure it to block remote users’ internet access when they are unable to
connect with the Remote Filtering Server. You can also configure the length
of time that the Remote Filtering Client on a remote user’s machine will
attempt to connect with a Remote Filtering Server before failing closed and
blocking access to all websites.
This behavior is controlled by the following two parameters in the
securewispproxy.ini file on the Remote Filtering Server machine:
 FailClose: The FailClose parameter specifies whether a Remote
Filtering Client fails open or closed when connectivity with the Remote
Filtering Server is lost.
 When set to false, the Filtering Client fails open and all HTTP
traffic is allowed. The default value is
false.
 When set to true, the Filtering Client fails closed and all HTTP
traffic is blocked.
 FailCloseTimeout: The FailCloseTimeout parameter applies only
when Remote Filtering clients are set to fail closed (
FailClose=true).
FailCloseTimeout specifies the amount of time, in minutes, that the
Remote Filtering Client tries to connect with the Remote Filtering Server
before failing closed and blocking all HTTP traffic. During this time, all
HTTP traffic is permitted. The default value is 15, but can be set to any
integer from 0 to 60. A value of 0 disables the timeout. If any other value
is entered, the default of 15 minutes is enforced.
To set these parameters so that remote users’ internet access is blocked when
they are unable to establish a connection with the Remote Filtering Server:
1. On the Remote Filtering Server machine, locate the
securewispproxy.ini file in the bin subdirectory in the Websense
installation directory. The default location of this file is:
 Windows: \Program Files\Websense\bin