Installation guide

208  Websense Installation Guide
Chapter 5: Initial Setup
The Websense Traffic Visibility Tool appears.
Traffic Visibility Tool
2. From the Network Card drop-down list, select the network interface card
(NIC) that the Network Agent is configured to use.
Field Description
Network Card Name of the network interface card (NIC) to test.
Active cards on the installation machine appear in
this list. Cards without an IP address will not appear
in this list.
Networks Tested Displays the netmasks that are being tested. You
may use the defaults provided or add your own.
These netmasks can reside in different network
segments depending upon the IP address ranges to
be filtered.
IP Address Count Number of IP addresses for which traffic is detected
during the test of a network.
IP Address List
Detail
Lists all the IP addresses in the network from which
internet traffic is being detected.