Installation guide

160  Websense Installation Guide
Chapter 4: Installing Websense Enterprise or Web Security Suite
 If you want this installation of the Remote Filtering Server to function
as a backup (secondary or tertiary) server for a primary Remote
Filtering Server, you must enter the same pass phrase used when
installing the primary Remote Filtering Server.
 The pass phrase must include only ASCII characters. Do not use
extended ASCII or double-byte characters.
 You must use the pass phrase you enter in this screen when you install
the Remote Filtering Clients that will connect with this server. (See
Remote Filtering Server Connection Information, page 134.)
8. Enter and confirm your pass phrase.
The installer asks you to provide information about the machine on which
the Websense Filtering Service is installed.
9. Enter the actual (internal) IP address of the Filtering Service machine.
The installer asks if there is a firewall or other network device that
performs network address translation between the Filtering Service
machine and this Remote Filtering Server machine.
10. Enter yes or no.
If you entered yes, the installer asks for the translated (external) IP
address of the Filtering Service machine, visible to this machine. Enter
the translated IP address.
11. Enter the filter port number for the Filtering Service machine, if it was
changed from the default of 15868.
Warning
Be sure to record your pass phrase and keep it in a safe
place, as it cannot be retrieved from the Websense system
later.
Note
The filter port is the default communication port used by
the installer to install Filtering Service. If you installed
Filtering Service using a different communication port,
enter that port number.