Installation guide

Sun Java System Web Proxy Server  149
Chapter 4: Installing Websense Enterprise or Web Security Suite
The installer asks you for the IP address and filter port number for the
machine on which Filtering Service is installed.
6. Enter the IP address of the Filtering Service machine, and the port number
if different from the default, and then select Next to continue.
The installer asks if you want to allow Websense, Inc., to gather
information about the use of Websense-defined protocols. Information will
be used in the development of protocol filtering.
7. Select a Network Agent feedback option, and then select Next to
continue.
The installer asks you for the location of the installation directory.
8. Enter the path to the installation directory, or accept the default Websense
installation directory (
/opt/Websense). If this directory does not
already exist, the installer will create it.
The installer compares the system requirements for the installation you
have selected with the resources of the installation machine. If the
machine has inadequate disk space or memory, separate warnings are
displayed.
Note
The displayed filter port (15868) is the default port number
used by the installer to install Filtering Service. If you
installed Filtering Service using a different port number,
enter that port number.
Note
Network Agent never sends Websense, Inc., any
information that would identify specific users, no matter
which Network Agent feedback option is selected.
Important
The full installation path must use only ASCII characters.
Do not use extended ASCII or double-byte characters.