Installation guide

Sun Java System Web Proxy Server  139
Chapter 4: Installing Websense Enterprise or Web Security Suite
 PRIMARY_INTERNAL_WISP_PORT=<internal port number of
primary Remote Filtering Server
>
The port number for the internal communication port on the primary
Remote Filtering Server that can only be accessed from inside the
network firewall. This must be the same port entered in the Internal
Communication Port field when the Remote Filtering Server was
installed.
 If secondary and tertiary Remote Filtering Servers have been installed,
use the following parameters to configure communication with them:
 SECONDARY_WISP_ADDRESS=<external IP address or FQDN of
secondary Remote Filtering Server
>
 SECONDARY_WISP_PORT=<external IP address or FQDN of
secondary Remote Filtering Server
>
 SECONDARY_INTERNAL_WISP_ADDRESS=<internal IP address or
FQDN of secondary Remote Filtering Server
>
 SECONDARY_INTERNAL_WISP_PORT=<internal IP address or
FQDN of secondary Remote Filtering Server
>
 TERTIARY_WISP_ADDRESS=<external IP address or FQDN of
tertiary Remote Filtering Server
>
 TERTIARY_WISP_PORT=<external IP address or FQDN of tertiary
Remote Filtering Server
>
 TERTIARY_INTERNAL_WISP_ADDRESS=<internal IP address or
FQDN of tertiary Remote Filtering Server
>
 TERTIARY_INTERNAL_WISP_PORT=<internal IP address or FQDN
of tertiary Remote Filtering Server
>
These addresses and port numbers must match those entered during
installation of the Remote Filtering Servers, as noted above for the
primary Remote Filtering Server.
 PATH=<installation path>
Directory where the Remote Filtering Client will be installed on each
client workstation. If this parameter is not specified, the default
installation path is
C:\PROGRAM FILES\Websense\WDC, and the WDC
directory is hidden by default.