Installation guide

Sun Java System Web Proxy Server  137
Chapter 4: Installing Websense Enterprise or Web Security Suite
11. If a message appears indicating that you must restart the machine, click
Yes to restart now. Remote filtering will not function properly until the
machine is restarted.
If no message appears, restarting the machine is not required.
Installing Remote Filtering Client with a Third-Party Deployment
Tool
Before deploying the Remote Filtering Client to user workstations, make sure
that the Remote Filtering Server with which these clients will connect has
been correctly installed on a separate machine. See Remote Filtering Server,
page 123 for Windows installation instructions; see Remote Filtering Server,
page 157 for Solaris and Linux installation instructions.
To obtain the installer for the Remote Filtering Client, install the Remote
Filtering Client Pack on a Windows machine (see Remote Filtering Client
Pack, page 130 for instructions). If you selected the default installation path
of
C:\Program Files\Websense, the installer is placed in the following
location:
C:\Program Files\Websense\bin\
RemoteFilteringAgentPack\NO_MSI\CPMClient.msi
To deploy the Remote Filtering Client to Windows workstations, use this
installer with a third-party deployment tool, such as Microsoft
®
Systems
Management Server (SMS) or Novell
®
ZENworks
®
.
Command Line Parameters for Remote Filtering Client Installation
This section provides the command line parameters required to install the
Remote Filtering Client using a third-party deployment tool.
Remote Filtering Clients are installed on user workstations or notebook
computers that are used outside your organization’s internet gateway or
firewall. These machines must be able to connect with a Remote Filtering
Server that is located inside the internet gateway or firewall.
Each Remote Filtering Client must be configured to connect with a primary
Remote Filtering Server. If optional secondary and tertiary Remote Filtering
Servers were installed to provide failover capability for the primary server, the
Remote Filtering Client must be configured to connect with these as well. The
Remote Filtering Client will attempt to connect with the primary Remote
Filtering Server first, then the secondary, then the tertiary, then the primary
again, and so on.