Installation guide

136  Websense Installation Guide
Chapter 4: Installing Websense Enterprise or Web Security Suite
6. If you have installed the optional secondary and tertiary Remote Filtering
Servers to provide failover protection for the primary Remote Filtering
Server, enter connection information for these servers in the Secondary
Remote Filtering Server and Tertiary Remote Filtering Server
sections of the screen.
7. In the Encryption and Authentication section, do one of the following:
 Select Pass Phrase and enter the same pass phrase that was entered in
the Pass Phrase field during installation of the primary Remote
Filtering Server. (The secondary and tertiary Remote Filtering
Servers must have the same pass phrase as their primary Remote
Filtering Server.)
-OR-
 Select Encrypted Key and enter the encrypted key (shared secret)
created from the pass phrase and unpublished Remote Filtering
Server keys. The encrypted key can be found in the
WSSEK.dat file
on the Remote Filtering Server machine. If you selected the default
installation path, this file will be located at:
C:\Program Files\Websense\bin\WSSEK.dat
on Windows machines, and
/opt/Websense/bin/WSSEK.dat
on Solaris and Linux machines.
8. Click Next to continue.
9. Click Install to begin installation.
When the installer is finished, a message appears advising you that the
procedure was successful.
10. Click Finish to exit the installer.
Note
If the Remote Filtering Client is on a notebook computer
that is used both inside and outside the network firewall,
this port allows the Websense software to determine where
the machine is located and filter it appropriately. The
machine will be filtered in the same way as an internal
client when it is used inside the organization’s network
firewall, and by the Remote Filtering Service when it is
used remotely.