Installation guide

128  Websense Installation Guide
Chapter 4: Installing Websense Enterprise or Web Security Suite
11. In the first field, enter the actual (internal) IP address of the Filtering
Service machine.
12. Is there a firewall or other network device that performs network address
translation between the Filtering Service machine and this machine?
 If yes, enter the translated (external) IP address of the Filtering
Service machine.
 If no, click to deselect the checkbox and grey out the Translated
(external) IP address of Filtering Service field.
13. Enter the filter port number for the Filtering Service machine, if it was
changed from the default of 15868.
14. Enter the block page port number for the Filtering Service machine, if it
was changed from the default value of 15871.
15. Click Next.
The installer asks you to select an installation folder for the Websense
components.
16. Accept the default path (
C:\Program Files\Websense) or click
Browse to locate another installation folder, and then click Next to
continue.
Note
The filter port is the default communication port used by
the installer to install Filtering Service. If you installed
Filtering Service using a different communication port,
enter that port number.
Important
If there is a firewall between the Filtering Service machine
and the Remote Filtering Server machine, be sure to open
the filter port (15868) and block page port (15871) on that
firewall. Filtering Service must be able to accept
connections from the Remote Filtering Server, and serve
block pages to remote users. For more information, see
Firewall Configuration for Remote Filtering, page 216.