Installation guide

114  Websense Installation Guide
Chapter 4: Installing Websense Enterprise or Web Security Suite
2. Following the Custom installation path brings you to the component
selection screen. Select Real-Time Analyzer and click Next.
If the installation machine is multihomed, all enabled network interface
cards appear in a list.
3. Select the IP address of the card you want RTA to use to communicate
and click Next.
The installer asks you to identify the machine on which the Policy Server
is installed.
4. Enter the IP address of the Policy Server machine, and the port number if
different from the default, and then click Next.
The installer checks your system for a supported web server (Apache
HTTP Server or IIS) for the Real-Time Analyzer and takes the following
action:
 If both supported web servers are detected, a dialog box appears
asking you to choose one server for RTA.
 If one of the supported servers is detected, the installer continues. No
notification appears.
Note
The configuration port (55806) in this dialog box is the
default port number used by the installer to install the
Policy Server. If you installed the Policy Server using a
different port number, enter that port number in this dialog
box.