Installation guide

Sun Java System Web Proxy Server  111
Chapter 4: Installing Websense Enterprise or Web Security Suite
 If you chose a non-English language installer, click Next to continue.
The Websense Language Pack installer starts. Click Next in the
welcome screen and follow the onscreen instructions.
 If you chose an English language installer, click Finish to exit the
installer.
12. If you stopped your antivirus software, remember to start it again after
Websense components have been installed.
13. Configure Network Agent for use in your network. See the instructions
for initial configuration of Network Agent in Chapter 5: Initial Setup, as
well as the Network Agent chapter in the Administrator’s Guide for
Websense Enterprise and Web Security Suite.
DC Agent
DC Agent is a Websense transparent identification agent used in networks that
authenticate users with a Windows directory service (NTLM-based or Active
Directory). You can choose to install DC Agent during a Typical Websense
installation on Windows or Linux. If you did not install it, and you need to
authenticate through a Windows-based directory service, you can install DC
Agent on a Windows machine with the following procedure.
If your network is large, you may benefit from installing DC Agent on
multiple machines. This way, you will have ample space for DC Agent files
that are continually populated with user information. For additional
information about how to deploy DC Agent, see Websense Enterprise and
Web Security Suite Components, page 15.
Do not install DC Agent on the same machine as eDirectory Agent, as this can
cause conflicts.
To install DC Agent on a Windows machine:
1. Download and start the Windows installer using the procedure in
Windows Procedures, page 101.
2. Following the Custom installation path brings you to the component
selection screen. Select DC Agent and click Next.
If the installation machine is multihomed, all enabled network interface
cards appear in a list.
3. Select the IP address of the card you want DC Agent to use to
communicate and click Next.