Installation guide

Sun Java System Web Proxy Server  109
Chapter 4: Installing Websense Enterprise or Web Security Suite
4. Select Yes or No and click Next to continue:
 Select Yes if the installation machine is not being used as a firewall.
Installation will continue.
 Select No if you are attempting to install Network Agent on a firewall
machine, and Setup will exit. Install Network Agent on a machine
that is not running a firewall.
A screen appears asking you to select the network interface card (NIC)
that you want Network Agent to use for capturing traffic. All network
interface cards enabled in the machine appear in a list.
5. If the machine has multiple NICs, select the one that has visibility into the
internet traffic you want Network Agent to filter.
6. Click Next to continue.
The installer asks you to identify the machine on which the Websense
Filtering Service is installed.
Important
Network Agent cannot function properly on a machine
running a firewall.
The only exception is a blade server or appliance that has
separate processors or virtual processors to accommodate
Network Agent and the firewall software.
Note
After installation, you can run the Traffic Visibility Tool to
test whether the selected NIC can see the appropriate user
internet traffic. See Testing Visibility of Internet Traffic to
Network Agent, page 207.
Note
The communication port (15868) in this dialog box is the
default port number used by the installer to install Filtering
Service. If you installed Filtering Service using a different
port number, enter that port number in this dialog box.