Developers guide

Chapter 17
Copyright © 2008-2013 Inverse inc.
Administration Tools 93
Usage:
pfcmd_vlan command [options]
Command:
-deauthenticate de-authenticate a dot11 client
-deauthenticateDot1x de-authenticate a dot1x client (pass ifIndex for
wired 802.1x and mac for wireless 802.1x)
-getAlias show the description of the specified switch port
-getAllMACs show all MACS on all switch ports
-getHubs show switch ports with several MACs
-getIfOperStatus show the operational status of the specified switch
port
-getIfType show the ifType on the specified switch port
-getLocation show at which switch port the MAC is found
-getSwitchLocation show SNMP location of specified switch
-getMAC show all MACs on the specified switch port
-getType show switch type
-getUpLinks show the upLinks of the specified switch
-getVersion show switch OS version
-getVlan show the VLAN on the specified switch port
-getVlanType show the VLAN type on the specified port
-help brief help message
-isolate set the switch port to the isolation VLAN
-man full documentation
-reAssignVlan re-assign a switch port VLAN
-reevaluateAccess reevaluate the current VLAN or firewall rules of a
given MAC
-runSwitchMethod run a particular method call on a given switch (FOR
ADVANCED PURPOSES)
-setAlias set the description of the specified switch port
-setDefaultVlan set the switch port to the default VLAN
-setIfAdminStatus set the admin status of the specified switch port
-setVlan set VLAN on the specified switch port
-setVlanAllPort set VLAN on all non-UpLink ports of the specified
switch
Options:
-alias switch port description
-ifAdminStatus ifAdminStatus
-ifIndex switch port ifIndex
-mac MAC address
-showPF show additional information available in PF
-switch switch description
-verbose log verbosity level
0 : fatal messages
1 : warn messages
2 : info messages
3 : debug
4 : trace
-vlan VLAN id
-vlanName VLAN name (as in switches.conf)