Developers guide

Chapter 6

Configuration by example 41

[general]

domain=yourdomain.org

#Put your External/Infra DNS servers here

dnsservers=4.2.2.2,4.2.2.1

dhcpservers=192.168.2.1,192.168.3.1,192.168.5.1

[trapping]

registration=enabled

detection=enabled

range=192.168.2.0/24,192.168.3.0/24,192.168.5.0/24

[interface eth0]

mask=255.255.255.0

type=management

gateway=192.168.1.1

ip=192.168.1.5

[interface eth0.2]

mask=255.255.255.0

type=internal

enforcement=vlan

gateway=192.168.2.1

ip=192.168.2.1

[interface eth0.3]

mask=255.255.255.0

type=internal

enforcement=vlan

gateway=192.168.3.1

ip=192.168.3.1

[interface eth0.5]

mask=255.255.255.0

type=internal

enforcement=inline

gateway=192.168.5.1

ip=192.168.5.1

[interface eth1]

mask=255.255.255.0

type=monitor

gateway=192.168.1.5

ip=192.168.1.1

Note

If you are running in an high-available setup (with a cluster IP), make sure to add the

vip parameter to the configured management interface so that RADIUS dynamic auth

messages can reach the network equipment correctly.