VoyenceControl – Release Notes Hot Fix 2 EMC VoyenceControl ® Version 4.1.0 RELEASE NOTES P/N 300-008-381 REV A06 Release Notes EMC Corporation Corporate Headquarters Hopkinton, MA 01748-9103 Version 4.0.1 Page 1 1-508-435-1000 www.EMC.
EMC VoyenceControl - Release Notes COPYRIGHT Copyright © 2009 EMC Corporation. All rights reserved. Published August 2009 EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS.
EMC VoyenceControl – Release Notes TABLE OF CONTENTS COPYRIGHT ............................................................................................................... 2 TABLE OF CONTENTS ................................................................................................. 3 INTRODUCTION......................................................................................................... 5 What is EMC VoyenceControl? ....................................................................
EMC VoyenceControl – Release Notes (23074) – Compliance Error When Attempting to Execute Compliance Audit on Nokia Appliance ............................................................................................................. 12 KNOWN ISSUES ........................................................................................................13 (22192) – Data Field Names – New Data Field Names are not Replacing the Old Data Field names after Migration .............................................
EMC VoyenceControl – Release Notes INTRODUCTION What is EMC VoyenceControl? An automated compliance, change and configuration management solution that delivers industry-recognized best practices A collaborative network infrastructure design, controlled change processes, network device and service configuration transparency, and compliance with corporate and regulatory requirements—to enable you to ensure the security, availability, and operational efficiency of your network An automated support
EMC VoyenceControl – Release Notes PRE-REQUISITES For upgrading to VoyenceControl 4.1.0: You must be running VoyenceControl 3.6.2 (or higher), or VoyenceControl 4.0.1 (or higher). If you are running any other versions lower than VoyenceControl 3.6.2, you must first upgrade to VoyenceControl 4.0.1. Release Notes Version 4.1.
EMC VoyenceControl – Release Notes ADDITIONAL INFORMATION Installer Bundle – Now a zip File The installer bundle is now a zip file. This zip file contains the ISO file (which has all the installer binaries and the Data-Migration-4.1.0.zip), a Data-Migration-4.1.0-patch.zip, and the ReadMeFirst.pdf file. The zip file for each environment is entitled: For Windows Windows: VC410-Win_VoyenceControl.zip For Linux Linux: VC410-RHEL_VoyenceControl.zip For Solaris Solaris: VC410-Sol10_VoyenceControl.
EMC VoyenceControl – Release Notes WHAT’S NEW IN VOYENCECONTROL 4.1.0 This section details enhancements in VoyenceControl for the 4.1.0 release. Addition of RHEL 5 Support VoyenceControl 4.1.0 now supports Red Hat Enterprise Linux 5, 64-bit. Java Support As of this release, any Java 1.6.x, up to and including 1.6.0_12 versions are supported versions of Java within VoyenceControl 4.1.0. Automation Library - Quick Steps to Compliance Previously in the 4.0.
EMC VoyenceControl – Release Notes Several enhancements have been provided that give Step Compliance much more flexibility and power.
EMC VoyenceControl – Release Notes RSA SecurID Two Factor Authentication Support VoyenceControl has been enhanced to support devices that are secured with RSA SecurID® two factor authentication. RSA SecurID® two factor authentication offers a unique, timesynchronous solution that automatically changes the user’s password every 60 seconds. The VoyenceControl enhancements enable customers to discover, manage, and perform compliance on their RSA SecurID secured devices.
EMC VoyenceControl – Release Notes FIXED ISSUES The following are fixed issues in VoyenceControl 4.1.0. Unless otherwise noted, issues listed here apply to Linux, Windows, and Solaris environments. Note: The number displayed within parenthesis is used for internal quality tracking purposes. (20112) – Cut-Through not offering a "more" Option when Viewing Configuration Previously, while using cut-through, users were not able to view all the available configuration information.
EMC VoyenceControl – Release Notes (21994) – Customize Column Sizing not being Maintained Previously, when columns sizes were customized, the size of the columns were not being maintained, and were reset after being refreshed. This has been fixed.
EMC VoyenceControl – Release Notes KNOWN ISSUES The following are known issues in VoyenceControl 4.1.0. Unless otherwise noted, issues listed here apply to Linux, Windows, and Solaris environments. Note: The number displayed within parenthesis is used for internal quality tracking purposes. (22192) – Data Field Names – New Data Field Names are not Replacing the Old Data Field names after Migration When migrating from VoyenceControl 3.6.x or 4.0.1 to VoyenceControl 4.1.
EMC VoyenceControl – Release Notes (22595) – Intermittent deadlock - Importing/Exporting Automation Library items. When using the Automation Library and left clicking on the Import button, the applications deadlocks intermittently. This is a Java bug. The following are the Java defect IDs you may want to use for tracking purposes. http://bugs.sun.com/view_bug.do?bug_id=6741890 http://bugs.sun.com/view_bug.do?bug_id=6789084 http://bugs.sun.com/view_bug.
EMC VoyenceControl – Release Notes (22943) – "Error: Version Already Installed" Message after a Failed install or Upgrade The "Version Already Installed" message indicated that enough of the product was installed to make it appear that the new version is present. This could happen when the installation is aborted or stopped in the middle of execution.
EMC VoyenceControl – Release Notes (23027) – Upgrading a Device Server from VoyenceControl 3.6.2 to 4.1.0 does not Retain Multi-Level Mode Note: This issue only applies to environments where Multi-Level mode is enabled (which is not common). When upgrading a VoyenceControl device server that is configured for Multi-Level mode, from version 3.6.2 to 4.1.0, you must manually create the cutthrumode file. This is not an issue with upgrading from VoyenceControl 4.x, or an issue with new installations.
EMC VoyenceControl – Release Notes (23118) – System Management Console - Password gets reset to 'sysadmin' after Upgrading (Windows Only) When upgrading to VoyenceControl to 4.1.0 on Windows, the System Management Console password is reset to 'sysadmin'. Workaround 1. To set the password, run the [Product Directory]/tools/password-change.pl utility, and change the password for the 'smc-user' account. 2. For more information on using the password-change.
EMC VoyenceControl – Release Notes (23548) – Can Not Install Integration Modules under the VoyenceControl 4.1 API in VoyenceControl version 4.1.0 When installing the Integration Modules on VoyenceControl version 4.1.0, you must install the Integration Modules to the default API version of 4.0 and NOT the API 4.1 version. For example, at the following: Please enter the version of the VoyenceControl API you would like to use. Accept the Default : 4.0 (for the 4.0 API version - API Version-DEFAULT: 40.
EMC VoyenceControl – Release Notes INSTALLING VOYENCECONTROL 4.1.0 When installing VoyenceControl 4.1.0, review the following documents for detailed instructions. Installing VoyenceControl on Red Hat Enterprise Linux 4 and 5 Installing VoyenceControl on Windows Server 2003 Installing VoyenceControl on Solaris 10 UPGRADING TO VOYENCECONTROL 4.1.0 Upgrade Instructions for VoyenceControl 4.1.
EMC VoyenceControl – Release Notes WHERE TO GET HELP Where to get help EMC support, product, and licensing information can be obtained as follows. Product information — For documentation, release notes, software updates, or for information about EMC products, licensing, and service, go to the EMC Powerlink website (registration required) at: http://Powerlink.EMC.com Technical support — For technical support, go to EMC Customer Service on Powerlink.
