Installation guide

76 Chapter 6. Network Configuration
Figure 6-3. ISDN Settings
5. If your ISP is in the pre-configured list, select it. Otherwise, enter the required infor-
mation about your ISP account. If you do not know the values, contact your ISP. Click
Next.
6. On the Create Dialup Connection page, click Finish.
After configuring the ISDN device, it appears in the device list as an ippp device as shown
in Figure 6-4.
Figure 6-4. ISDN Device
Be sure to click Apply to save the changes.
After adding the modem device, you can edit its configuration by selecting the device from
the device list and clicking Edit. For example, when the device is added, it is configured not
to start at boot time by default. Edit its configuration to modify this setting. Compression,
PPP options, login name, password, and more can be changed.
When the device is added, it is not activated, as seen by its Inactive status. To activate the
device, select it from the device list, and click the Activate button.