Installation guide

Chapter 6. Network Configuration 75
After configuring the Ethernet device, it appears in the device list as shown in Figure 6-2.
Figure 6-2. Ethernet Device
Be sure to click Apply to save the changes.
After adding the Ethernet device, you can edit its configuration by selecting the device from
the device list and clicking Edit. For example, when the device is added, it is configured to
start at boot time by default. You can edit its configuration to modify this setting.
When the device is added, it is not activated, as seen by its Inactive status. To activate the
device, select it from the device list, and click the Activate button.
6.3. Establishing an ISDN Connection
An ISDN connection is an Internet connection established with a ISDN modem card through
a special phone line installed by the phone company. ISDN connections are popular in Eu-
rope.
To add an ISDN connection, follow these steps:
1. Click the Devices tab.
2. Click the Add button.
3. Select ISDN connection from the Device Type list, and click Next.
4. Select the ISDN adapter from the pulldown menu. Then configure the resources and D
channel protocol for the adapter. Click Next to continue.