Installation guide

34 Chapter 1. Kickstart Installations
1.4.24. text
text (optional)
Perform the kickstart installation in text mode. Kickstart installations are performed in
graphical mode by default.
1.4.25. timezone
timezone (required)
timezone [--utc]
timezone
Sets the system time zone to timezone which may be any of the time zones listed
by timeconfig.
--utc
If present, the system assumes the hardware clock is set to UTC (Greenwich Mean)
time.
1.4.26. upgrade
upgrade (optional)
Tells the system to upgrade an existing system rather than install a fresh system.
1.4.27. xconfig
xconfig (optional)
Configures the X Window System. If this option is not given, the user will need to con-
figure X manually during the installation, if X was installed; this option should not be
used if X is not installed on the final system.
--noprobe
Do not probe the monitor.
--card
card
Use card card ; this card name should be from the list of cards in Xconfigurator.
If this argument is not provided, Anaconda will probe the PCI bus for the card.
Since AGP is part of the PCI bus, AGP cards will be detected if supported. The
probe order is determined by the PCI scan order of the motherboard.
--videoram
vram
Specify the amount of video RAM the video card has.