Installation guide

188 Chapter 21. Printer Configuration
Figure 21-12. Choosing a Print Server
The next step is to select the type of printer that is connected to the JetDirect system. Skip to
Section 21.6 to continue.
21.6. Selecting the Print Driver and Finishing
After selecting the queue type of the printer, the next step in adding a printer is to select the
print driver.
You will see a window similar to Figure 21-13. If you are configuring a local printer, select
the print driver from the list. The printers are divided by manufacturers. Click the arrow
beside the manufacturer for your printer. Find your printer from the expanded list, and click
the arrow beside the printer name. A list of drivers for your printer will appear. Select one.
Tip
To learn more about the print drivers, go to http://www.linuxprinting.org/printer_list.cgi.
Tip
You can select a different print driver after adding a printer by starting printconf, selecting the printer
from the list, clicking Edit, clicking the Driver tab, selecting a different print driver, and applying the
changes.