Installation guide

Chapter 21. Printer Configuration 187
21.5. Adding a JetDirect Printer
To add a JetDirect printer, click the New button in the main printconf window. The window
shown in Figure 21-1 will appear. Click Next to proceed.
You will see the screen shown in Figure 21-11. Enter a unique name for the printer in the
Queue Name text field. The printer name cannot contain spaces and must begin with a letter
a through z or A through Z. The valid characters are a through z, A through Z, 0 through 9,
-, and _.
Select JetDirect Printer from the Queue Type menu, and click Next.
Figure 21-11. Adding a JetDirect Printer
Text fields for the following options appear below the Queue Type menu as shown in Figure
21-12:
• Printer IP — The hostname or IP address of the JetDirect printer.
• Port — The port on the JetDirect printer that is listening for print jobs.