Installation guide

Chapter 18. Time and Date Conﬁguration 165

For more information on NTP, read the NTP documentation available in the

/usr/share/doc/ntp-version-number directory.

Clicking the Apply button will apply any changes that you have made to the date and time,

the NTP daemon settings, and the time zone settings. Clicking the Ok button will apply the

changes and then exit the program.

18.2. Time Zone Conﬁguration

To conﬁgure the system time zone, click the Time Zone tab as shown in Figure 18-2. The

time zone can be changed by either using the interactive map or by choosing the desired

time zone from the list below the map. To use the map, click on the city that represents the

desired time zone. A red X will appear and the time zone selection will change in the list

below the map. Click Apply to save the changes. Click Ok to apply the changes and exit the

program.

If your system clock is set to use UTC, select the System clock uses UTC option. UTC stands

for the universal time zone, also known as Greenwich mean time (GMT). Other time zones

are determined by adding or subtracting from the UTC time.

Figure 18-2. Timezone Conﬁguration