Technical data

50 Brocade Network Advisor SAN Installation and Migration Guide

53-1003580-01

Migrating data

d. Enter a port number in the Starting Port # field (default is 24600).

NOTE

For Trial and Licensed software, the server requires 11 consecutive free ports beginning

with the starting port number.

e. Enter a port number in the Syslog Port # field (default is 514).

NOTE

If the default syslog port number is already in use, you will not receive any syslog

messages from the device. To find and stop the process currently running on the default

Syslog port number, refer to “Syslog troubleshooting” on page 27.

f. Enter a port number in the SNMP Port # field (default is 162).

g. Enter a port number in the TFTP Port # field (default is 69).

h. Click Next.

If you enter a syslog port number already in use, a message displays. Click No on the

message to remain on the Server Configuration screen and edit the syslog port number.

Click Yes to close the message and continue with

step 11.

If you enter a port number already in use, a warning displays next to the associated port

number field. Edit that port number and click Next.

11. (SAN with SMI Agent) Complete the following steps on the SMI Agent Configuration screen.

a. Enable the SMI Agent by selecting the Enable SMI Agent check box.

b. Enable the SLP by selecting the Enable SLP check box, if necessary.

Only enabled after you select the Enable SMI Agent check box.

c. Enable the SSL by selecting the Enable SSL check box, if necessary.

Only enabled after you select the Enable SMI Agent check box.

d. Enter the SMI Agent port number in the SMI Agent Port # field (default is 5989 if SSL

Enabled is selected; otherwise, the default is 5988).

e. Click Next.

12. (SAN Enterprise or SMI Agent) Select one of the following options on the SAN Network Size

screen and click Next:

NOTE

Port count is equal to the total number of switch ports across all fabrics.

• Small (managing up to 2000 switch ports, 1-20 domains)

• Medium (managing up to 5000 switch ports, 21-60 domains)

• Large (managing up to 15000 switch ports, 61-120 domains)

13. Verify your configuration information on the Server Configuration Summary screen and click

Next.