Installation guide

To determine the host ID of the machine, run the lmutil utility from a terminal window or the Windows command

prompt. For example:

lmutil lmhostid

Note

You can download the lmutil utility from either:

● The SAP ASE installer image, under the sysam_utilities directory; or,

● The Flexera Software Web site at http://www.globes.com/support/fnp_utilities_download.htm .

You can also determine the host ID using native operating system commands. See the Frequently Asked

Questions topic "What is my Host ID?" at https://websmp208.sap-ag.de/~sapidb/

011000358700001006652011E (requires login)

6.2.3.1 Determining Host IDs for Machines with Multiple

Network Adapters

On some platforms, the host ID is derived from the network adapter address.

Context

If the machine where your product is installed or where the license server is hosted has multiple network

adapters, running lmutil lmhostid returns one host ID for each network adapter, and returns output similar to

this:

The FLEXlm host ID of this machine

is ""0013023c8251 0015c507ea90""

Only use ONE from the list of hostids.

It is important that you:

● Choose only one host ID to enter during license generation.

● Use the value associated with the primary wired Ethernet adapter.

● Do not use values associated with internal loopback or virtual adapters.

If you cannot determine the host ID using the lmutil lmhostid output, use the native operating system

commands to get additional details.

Installation Guide for Linux

Planning Your SAP ASE Installation