Installation guide

How to Configure a Domino Web Agent on UNIX Systems
Chapter 8: Configure a Domino Web Agent 143
Important! If you uncheck a previously configured server, the Web
Agent will be removed from this server.
b. Click Next.
6. In the Agent Configuration Object field, enter the name of the Agent
Configuration Object for this web server instance.
This name must match an Agent Configuration Object already defined at the
Policy Server. For example, to use the default enter DominoDefaultSettings.
7. In the Web Server Configuration Summary dialog box. Confirm that the
configuration settings are correct, then click Install.
The Web Agent files are installed.
8. Click Done when the installation is complete.
9. Enable the Web Agent:
a. Open the WebAgent.conf file, located in the Domino web server root
directory.
b. Set the EnableWebAgent parameter to Yes.
c. Save the file.
10. If your Domino web server runs on AIX, you must enable run time linking
after configuring your agent (you only need to do this once) with the
following steps:
a. Run the following commands:
cd domino_server_path/lotus/notes/latest/ibmpow
/usr/bin/rtl_enable ./http -brtl
mv ./http ./http.orig
mv ./http.new ./http
b. Start the Domino web server.
(Optional) Configure the CGI Directory and CGI URL Path Settings
To configure appropriate cgi-bin (ScriptAlias) settings for the Domino Web
Agent, navigate to Internet Protocols tab for your server configuration in the
Domino Administrator and configure the following settings:
■
CGI directory: domino/html/cgi-bin
■
CGI URL path: /cgi-bin