Installation guide

Configure a Domino Web Agent on Windows Systems
138 Web Agent Installation Guide
Important! If you uncheck a previously configured server, the Web
Agent will be removed from this server.
b. Click Next.
6. In the Agent Configuration Object field, enter the name of the Agent
Configuration Object for this Web server instance, then click Next.
This name must match an Agent Configuration Object already defined at the
Policy Server. For example, to use the default enter DominoDefaultSettings.
7. In the Web Server Configuration Summary dialog box, confirm that the
configuration settings are correct, then click Install.
The Web Agent files are installed.
8. Click Done when the installation is complete.
9. Enable the Web Agent:
a. Open the WebAgent.conf file, located in where you installed the Domino
Web server root directory.
b. Set the EnableWebAgent parameter to YES.
c. Save the file.
More Information
Agent Configuration Parameters Required for Domino Web Agents (see page 22)
Register Your System as a Trusted Host on UNIX (see page 62)
(Optional) Configure the CGI Directory and CGI URL Path Settings
To configure appropriate cgi-bin (ScriptAlias) settings for the Domino Web
Agent, navigate to Internet Protocols tab for your server configuration in the
Domino Administrator and configure the following settings:
■
CGI directory: domino\html\cgi-bin
■
CGI URL path: /cgi-bin