Installation guide

Figure 2. Restarting IIS 5.0 on Windows 2000 (Step 2)
3.7.3 Apache Web Server Issues
Following are Apache web server issues.
3.7.3.1 Apache Support on Red Hat 9
Red Hat 9 comes with Apache 2.0.40. As discussed in the requirements section above,
BlueDragon supports only 2.0.42 through 2.0.53. Please upgrade to one of these later
versions of Apache. A solution for this problem is under consideration. Please contact
[e-mail] for more information if you cannot upgrade your
Apache version.
3.7.3.2 Apache Configurations in Linux and Mac OS X
Mac OS X and many Linux distributions provide pre-installed Apache web server
configurations. Some of these installations use Apache directory structures that are
unique to the installation and differ from the "standard" provided by the Apache Group's
binary and source configurations. Rather than recognizing all these configurations, the
BlueDragon Server installers and administration console assume a "standard"
configuration used by the Apache Group's binary packages (there is one exception
described below). Therefore, in such situations with a non-standard Apache installation,
BlueDragon will not present the option to integrate with Apache during installation or on
the Web Server Adapter screen in the BlueDragon Admin console.
To accommodate for these differences, the following information described a method to
create a simple set of symbolic links which allow BlueDragon to properly detect any non-
standard Apache installation. This set of symbolic links must be established prior to
installation of the BlueDragon Apache adapter—either before installation of BlueDragon
BlueDragon 6.2.1 Server and Server JX Installation Guide
12