Specifications

The Meaning of LED Indicators
198 SnapServer Administrator Guide
Controller LEDs
The controller has two LEDs that indicate status.
These LEDs operate as described in the following table:
Snap Disk 10 Disk Drive and Power Supply Module LEDs
This section describes the LED indicators on the Snap Disk 10’s disk drives and
power module.
Disk Drive LEDs
The Snap Disk 10 has two lights below each disk drive. The Power light (left)
indicates power. The Status light (right) indicates system activity.
LED Condition Indication
Master On Controller is current Master for enclosure.
Fault On 5-10 seconds only Enclosure is powering on.
On continuously Fault condition exists on controller
FAULT !
SEP MASTER
HOST
EXP
Fault LED (yellow)
Master LED (green)
Status
Power
Drive Activity
Drive Status