Specifications

The Meaning of LED Indicators
194 SnapServer Administrator Guide
Disk Drive LEDs
Disk drive LEDs on the SnapServer 18000 are located on the bezel to the right of the
LED display. The left light indicates drive status. The right light indicates drive
activity. The LEDs operate as described in the following table:
Power Supply Module Indicator Lights
The LEDs on an 18000 power module are identified in the following illustration.
LAN 1 and LAN 2 LEDs
Solid green The server is active and connected to the network.
Off The port is disconnected; or the Ethernet cable is not
connected or linked to an active switch.
Status LED (left) Activity LED (right)
Solid green Off Disk drive installed properly but is not active
Solid green Blinking green Disk drive installed properly and is active
Solid amber Off Disk drive installed, but not working correctly
Off Off No disk drive installed
Power Fault AC Description
Solid green Off Solid green The module is operating properly.
Off Solid red Solid green The module has failed.
Off Off Off The module is not connected.
Fault
AC
Power