Specifications

The Meaning of LED Indicators
192 SnapServer Administrator Guide
Disk Drive LEDs
Disk drive LEDs on these SnapServers are located at the base of the bezel. The left
light indicates drive status. The right light indicates drive activity. They operate as
follows:
Blinking amber
during normal
operation
A thermal or other system problem was detected
Blinking amber and
green
The server is in Maintenance Mode.
System LED
LAN 1 and LAN 2 LEDs
Solid green The server is active and connected to the network on the
network port.
Off The port is disconnected or the Ethernet cable is not connected
or linked to an active switch.
Status LED (left) Activity LED (right)
Solid green Off Disk drive installed properly but is not active
Solid green Blinking green Disk drive installed properly and is active
Solid amber Off Disk drive installed, but not working correctly
Off Off No disk drive installed