Specifications

The Meaning of LED Indicators
Appendix C Troubleshooting SnapServers 191
SnapServer 4200/4500 Status and Drive Light Behavior
The server has two status lights, two network lights, and two lights for each of the
four disk drives, as shown in the following illustration:
Overland Storage recommends that you become familiar with the operation of these
lights.
Power, System, and LAN LEDs
These status lights are located to the right of the power button. Looking at the
server from the front, the lights appear in the following order, from left to right:
power LED, system LED, LAN 1 (Ethernet1) LED, and LAN 2 (Ethernet2) LED.
The LEDs operate as described in the following tables:
Power LED
Solid green The server is powered on.
Off The server is powered off.
System LED
Double-blink green The server is booting up.
Triple-blink green The server is shutting down.
Solid or blinking
amber at boot time
A problem was detected. The server will not boot.
Power LED
System LED
LAN LEDs
Disk Drive LEDs