Specifications

Integrated Backup Solutions for the SnapServer
150 SnapServer Administrator Guide
Configuring Snap EDR for GuardianOS
To configure the SnapServer as a Management Console or an Agent, do the
following:
1 Click the Snap EDR link in the Site Map (under Extras).
2 Select either the Configure as the Management Console or Configure as the Agent
button.
Note If you are configuring the server as an Agent, you must provide the server
name or IP Address of the Management Console.
3 Once the server is configured, a screen appears with the following options:
Scheduling Jobs in Snap EDR
To schedule jobs, click the Snap EDR link in the Site Map (under Extras).
For complete information on using Snap EDR, see the Snap EDR Administrator’s
Guide, available on the SnapServer w
ebsite.
Option Description
Click here to
configure jobs
Opens the Management Console where jobs can be scheduled.
Stop Service Stops all services.
Restart Service Restarts all services.
Caution! Use only if you have encountered a problem, and customer
support advises you to restart the service. Any jobs currently running
will stop and will not resume when you restart the service
Disable Service
on System Boot
By default, when a user reboots the SnapServer, services
automatically restart. Select Disable Service on System Boot if you
do not want the Snap EDR service to start up automatically.
Note When the disable service option is selected, the Enable
Service on System Boot button appears.
Uninstall
Service
Uninstalls all components of Snap EDR.