Specifications

Creating iSCSI Disks
92 SnapServer Administrator Guide
To View iSCSI Disk Status Information
You can view iSCSI disk status information from the
Storage > iSCSI screen.
To Configure iSNS
Go to the
Network > iSNS screen, from which you can configure iSNS.
To Edit an iSCSI Disk
Click an iSCSI disk name. You can increase (but not decrease) its size and enable or
disable CHAP logon.
Note You cannot edit an iSCSI disk if an initiator is connected. The hostname and
IQN name of all connected initiators will be displayed.
To Delete an iSCSI Disk
The system will not allow the deletion of an iSCSI disk when clients are connected
(the hostname and IQN name of all connected initiators will be displayed). After
disconnecting all client initiators, click
Delete, and then follow the onscreen
instructions to delete one or more iSCSI disks.
Label Description
iSCSI Disk Name The name of each iSCSI disk
Volume The volume on which the iSCSI disk was created
Status Current condition of the iSCSI disk:
• OK — The iSCSI disk is online and accessible.
• Not Mounted — The iSCSI disk is offline.
Active Client The number of current sessions
Authentication CHAP or none
Size The size of the iSCSI disk