Specifications

Kernel Parameter and Resource Controls Requirements - Solaris Installation
46 Release Notes
2. Edit the /etc/sysctl.conf file by adding or updating the following kernel parameters,
if the values in your environment are less than the following recommended values:
fs.file-max = 8192
kernel.msgmnb = 65535
kernel.msgmni = 128
kernel.msgmax = 32768
kernel.sem = 100 512 100 256
kernel.shmmni = 512
kernel.shmmax = 1073741824
kernel.threads-max = 65262
3. Issue the following command:
/sbin/sysctl -p /etc/sysctl.conf
The sysctl settings are loaded from /etc/sysctl.conf file.
4. Restart your computer.
The updated kernel parameters take effect.
Kernel Parameter and Resource Controls Requirements -
Solaris Installation
To install and run the common components on Solaris 9, the following kernel parameter
requirements must be met or exceeded:
forceload: sys/msgsys
forceload: sys/semsys
forceload: sys/shmsys
set msgsys:msginfo_msgmax = 32768
set msgsys:msginfo_msgmnb = 65535
set msgsys:msginfo_msgmni = 128
set msgsys:msginfo_msgseg = 8192
set msgsys:msginfo_msgtql = 256
set semsys:seminfo_semmap = 258
set semsys:seminfo_semmni = 256
set semsys:seminfo_semmns = 512
set semsys:seminfo_semmsl = 100
set semsys:seminfo_semmnu = 80
set semsys:seminfo_semopm = 20
set semsys:seminfo_semume = 40
set semsys:seminfo_semusz = 96
set semsys:seminfo_semvmx = 32767
set semsys:seminfo_semaem = 16384
set shmsys:shminfo_shmmax = 1073741824
set shmsys:shminfo_shmmni = 512
set shmsys:shminfo_shmseg = 50
set rlim_fd_cur = 576